|
Twin Screw
Ex. R.N.L.I. Fast Rescue Vessel
SOLD
Top |
|
Built: |
By Halmatic 1981 Type Arun class 52 |
|
Construction: |
G.R.P. semi displacement hull with
26 water tight compartments and void spaces filled with foam buoyancy to keep
the vessel afloat if holed |
|
Class: |
M.C.A. Work boat code until 2008 |
|
Dimensions: |
Length 52ft (15.86m), beam 17ft-6"
(5.34m), loaded draught aft 5ft (1.17m), loaded draught forward 3ft-10"
(1.17m) |
|
Displacement: |
31 tons (31.5 tons) |
|
Main engines: |
Twin screw 2 x Caterpillar 3408TA diesel of
485 SHP each 363.75KW each. Port engine with 828 hours, starboard
engine with 821 hours, all servicing results available |
|
Speed: |
Maximum 18 knots, cruising speed 17 knots,
range 200 nautical miles at full speed |
|
Tank capacity: |
2 x 248 gallons (2 x 1127.3 litres) |
|
Accommodation: |
There are two survivor cabins below deck
containing rescue equipment, first aid gear, stretchers, emergency rations
and blankets |
|
Nav. Aids: |
The vessel is equipped with a
comprehensive range of up to date navigation and safety equipment, A Y boat
with 15HP mariner outboard is housed on the flying bridge |
|
Remarks: |
The vessel is in the same condition as
purchased from the R.N.L.I. and no changes have been made. The vessel
is in very well maintained condition and well worth inspection |
|
Price: |
Pounds sterling £159,000.
Inspection/delivery West Coast Port |
click on image to enlarge and print
|
|
Aluminium Outboard Workboat Folio WB105/O
SOLD |
|
Built: |
By Malakoff Limited (Voe Boats) Shetland
Islands |
|
Construction: |
Welded aluminium foam filled and
unsinkable with forward wheelhouse and self draining deck |
|
Length: |
21ft (6.40m) |
|
Motor: |
Suitable for outboard motors up to 100HP.
No motor included |
|
Price: |
Pounds sterling £2500 firm, plus VAT if
applicable. Inspection/delivery Clyde, Scotland |
|
This boat us fully road transportable |
click on image to enlarge and print
|
|
Single Screw Beaver
Workboat Folio WB101/C |
|
Built: |
By Newhaven Workboats about 1978 |
|
Construction: |
Welded steel |
|
Dimensions: |
Length 27ft (8.23m), beam 9'-6" (2.90m),
draught 3'-6" (1.07m) |
|
Engine: |
Single screw Gardner 6LW, 100HP driving
through Gardner 2UC, 2-1 reduction marine gearbox |
|
Layout: |
Forward engine room, mid ships wheelhouse,
open aft cockpit |
|
Remarks: |
In good running order by generally Tatty
condition and requires repaint and glass in wheelhouse, hence low price |
|
Price: |
Pounds sterling £14,000 firm, plus VAT if
applicable. Inspection/delivery out of the weighs about 8 tons |
|
This boat is fully road transportable and
weighs about 8 tons |
click on image to enlarge and print
|
|
GRP Outboard Dory Folio WB103/R
SOLD |
|
Built: |
By Dell Quay Boats, type Dell Quay Dory |
|
Construction: |
G.R.P. |
|
Length: |
18ft (5.49m) |
|
Engine: |
Mercury 70HP outboard motor |
|
Road trailer: |
4 wheel type |
|
Price: |
Pounds sterling £3500 plus VAT if
applicable. inspection/delivery West Coast Scotland |
|
click on image to enlarge and print
|
|
Outboard G.R.PWorkboat Folio WB104/W
SOLD |
|
Type: |
G.R.P. workbaot with self draining deck,
wheelhouse and yard trailer |
|
Length: |
20ft (6.10m) |
|
Motor: |
No motor included as it has been stolen,
but suitable for outboard motors up to 60HP |
|
Remarks: |
This boat is fully road transportable, but
trailer is not suitable for road use |
|
Price: |
Pounds sterling £4000 plus VAT if
applicable. Inspection/delivery Coast Scotland |
click on image to enlarge and print
|
|
Cygnus Cyfish GRP Workboat/Day Fishing Boat
Folio WB33/R
SOLD |
|
Built: |
U.K. 1988 |
|
Type: |
Cygnus Cyfish 39 G.R.P. work/fishing boat |
|
Class: |
None, did have loadline exemption but now
expired |
|
Dimensions: |
Length 39ft (11.89m), beam 12.66ft
(3.86m), draught 3.51ft (1.07m) |
|
Layout: |
Forward wheelhouse with large cleqr open
aft deck with aluminium chequer plate on the deck |
|
Main engine: |
Single screw Ford Sabre 130HP fully
rebuilt |
|
Nav. Aids: |
Furuno radar, VHF radio, echo sounder |
|
Remarks: |
owner advise, the boat is in very good
running order and has recently been repainted |
|
Price: |
Pounds sterling £45,000 firm.
Inspection/delivery West Coast Scotland |
click on image to enlarge and print
|
|
GRP Workboat Folio WB22/C
SOLD |
|
Built: |
By Signus Marine U.K. 1993 |
|
Type: |
Signus 21 with forward wheelhouse and open
aft cockpit |
|
Dimensions: |
Length 21ft (6.40m), beam 7'-6" (2.29m),
draught 2'-6" (0.76m) |
|
Main engine: |
Ford 21ft 4 cylinder 85HP driving through
Borg Warner hydraulic marine gearbox |
|
Remarks: |
A very useful road transportable general
duty workboat |
|
Price: |
Pounds sterling £15,000 plus VAT if
applicable. Inspection/delivery West Coast Scotland |
click on image to enlarge and print
|
|
Beaver Workboat Folio WB35/C
SOLD |
|
Built: |
By Newhaven Workboats 1979 |
|
Dimensions: |
Length 27ft (8.23m), beam 9ft (2.74m),
draught 3'-6" (1.07m) |
|
Main engine: |
Single screw Ford 6 cylinder 120HP marine
engine fitted with "new" Borg Warner hydraulic marine gearbox |
|
Remarks: |
The vessel is in good working order but is
generally tatty and needs a complete shot blast and repaint, hence price |
|
Price: |
Pounds sterling £8,500 plus VAT if
applicable. Inspection/delivery West Coast Scotland |
click on image to enlarge and print
|
|
Twin Screw Survey/Ploughing/General Duty
Workboat Folio WB363/C |
|
Built: |
U.S.A. 1970 |
|
Class: |
M.C.A. Workboat code CAT 2, 60 miles
offshore |
|
Dimensions: |
Length 18.77m, beam 6.71m, draught: |
|
Main engines: |
2 x G.M. 8V71, 250HP each driving twin
disc 3-1 reduction marine gearboxes to fixed pitch propeller |
|
Generators: |
1 x G.M. 3-71 37 KVA and 1 x Lister TR3
22KVA |
|
Speed: |
10 knots. Bollard pull 5 tons |
|
Tanks: |
Fuel 25,000 litres, freshwater 16,000
litres |
|
Deck equipment: |
Hydraulic "A" frame, 4 ton hydraulic winch
aft, 1 ton hydraulic winch forward, 6.6m plough, Bonfiglioli 27/TM crane |
|
Deck area: |
Clear self draining aft deck approximately
8m x 6.7m |
|
Accommodation: |
For 4 persons, with gallery, messroom,
toilet, shower |
|
Nav. Aids: |
Racal Decca radar, Koden GPS KGP98, Garmin
GPS 128, Lo Kata nav. Tex 2, sailor RM2042 DSC VHF, sailor RT2048 VHF,
Lawrence X25echo sounder |
|
Price ideas: |
Pounds sterling £170,000.
Inspection/delivery West Coast U.K. |
|
Comments: |
A very pretty and useful workboat for
plough dredging to 25m, survey duties, general workboat and mooring duties |
click on image to enlarge and print
|
|
Damen Single Screw Tug/Workboat Folio
WB97/NB
On Charter |
|
Built: |
By K. Damen Shipyard, Holland 1970 |
|
Class: |
M.C.A. workboat code CAT 2 |
|
Dimensions: |
Length 13.3m (44ft), beam 4m (13.12ft),
draught aft 1.5m (4.92ft) |
|
Main engine: |
Single screw Caterpillar D334TA,
240HP at 2000RPM |
|
Bollard pull: |
3 tons |
|
Speed: |
8.5 knots |
|
Equipment: |
"H" type towing post, push bow, fenders |
|
Generator: |
16HP, 220 V.A.C. |
|
Nav. Aids: |
Raytheon Pathfinder RL70 Radar, GPS
navigator, VHF radio |
|
Price ideas: |
Pounds sterling £65,000.
Inspection/delivery West Coast Scotland |
|
Comments: |
A very useful tug/workboat in well
maintained condition, well worth inspection |
click on image to enlarge and print
|
|
Line Handling/Towing Workboat Folio WB19/R |
|
Built: |
U.K. 1992 |
|
Class: |
under Clyde Port Authority Inspection |
|
Dimensions; |
Length 27ft (8.23m), beam 8ft (2.44m),
draught 3ft (0.91m) |
|
Main engine: |
Single screw Ford 4 cylinder 85HP driving
through PRM hydraulic marine gearbox to 4 blade propeller |
|
Deck equipment: |
Line handling rails over wheelhouse and
deck. Quick release towing hook |
|
Remarks: |
A fully road transportable workboat in
good serviceable condition |
|
Price: |
Pounds sterling £18,500 plus VAT if
applicable. Inspection/delivery West CoastScotland |
click on image to enlarge and print
|
|
Steel Single Screw Tug/workboat
Folio
WB992/JP
SOLD |
|
Type:
|
Steel forward
wheelhouse, open aft self draining deck tug/workboat |
|
Built:
|
1990/91 by Mervyn steel workboats, Gravesend, London, rebuilt 1999 |
|
Class:
|
MCA workboat code
cat.2, 60 miles from safe haven, plus 4500 kgs deck cargo |
|
Dimensions:
|
Length 12.5m, beam
4.3m, draught 1.7m |
|
Main engine: |
Gardner 8LXB, 240hp,
driving through twin disc hydraulic marine gearbox of 3-1 reduction, to 40"
4 blade towing propeller in Riguard, JPM rudder allows the vessel to turn in its
own length |
|
Generator:
|
10KVA (new 2001) |
|
Bollard pull:
|
3 tons |
|
Fuel capacity:
|
about 8 tons |
Clear aft deck, approx. 14ft ling x 13'-6" wide. Totally flat.
Heavy duty towing post
|
|
Accommodation:
|
With 2 berths, seating
for 12 persons, galley, toilet |
|
Nav. Aids:
|
Radar, VHF, echo
sounder, GPS |
|
Deck crane: |
Hydraulic knuckle boom
deck crane with 6.2m reach (new 2001) |
|
Price:
|
Pounds sterling
£85,000, firm no offers, inspection/delivery South West England |
|
|
Additional information of workboat Folio WB992/JP
1. Distance from rear of wheel house to stern 16ft -
6ins
2. Distance from tow post to stern 13ft - 6ins
3. Width of deck at stern inside gunwhales 11ft
4. Width of deck at tow post inside gunwhales 13ft -
5ins
5. Hull plating 6.4mm
6. Weight 25/27 tons
7. Crane: Bonfiglioli P2300L, lifting 740
kgs at 3m, 430 kgs at 4.11m, 370 kgs at 5.2m, 250 kgs at 6.35m
8. Free running speed 8.5 knots
9. Fuel capacity was 8 tons for refuelling vessels, now
1.6 tons and 2 x 1.5 wing tanks (not used at present)
10. No plans with vessel, building no longer in business, can draw a
rough layout by hand if required
|
|
click on image to enlarge and print
|
|
Small
Single Screw diesel general duty/line handling workboat
Folio
WB190/R |
|
Built:
|
1995 |
|
Construction:
|
Welded
aluminium |
|
Layout:
|
Forward
wheelhouse, open aft cockpit, separate engine room with watertight
bulkheads, large clear self draining aft deck |
|
Dimensions:
|
Length 23ft
(7.01m), beam 7'-6" (2.29m), draught 2'-6" (0.76m) |
|
Main engine:
|
Single screw
Cummins 100hp diesel engine |
|
Weight:
|
The boat is
fully road transportable and weighs 5.5 tons. a road trailer is
included in the sale but will require some attention before being used |
|
Comments:
|
A very
pretty and useful little workboat well worth inspection |
|
Price:
|
Pounds sterling £18,500 plus VAT if
applicable. Inspection/delivery West Coast Scotland |
click on image to enlarge and print |
|
Ex.
NATO mini push/tow tugboats, built Germany by Schottel Weft about 1973/85 and
mothballed until recently released
Folio
WB96/BK
All sold more promised from NATO stores |
|
|
Construction:
|
Welded steel |
|
Dimensions:
|
Length 9.20m
(30.18ft), beam 2.50m (8.20ft), draught 1m (3.28ft) |
|
Propulsion:
|
Single Schottel rudder propelled type SRP 100, driven by
a Duetz V12 type F12L714, 250hp at 2000 RPM diesel engine on top of the Schottel
leg there is a tap, this should be open when running and closed when standing |
Free running speed 21.5 km/hr about 12.50 knots, bollard pull 2500 kgs
approximately
Forward steering controls with windscreen/shelter, (folding for road transport),
fuel tank under drivers seat, 400 litres/88 gallons
|
|
Condition:
|
Little used,
low hours, all engines and mechanics are checked over and serviced by Schottel by Schottel main dealers. New batteries
fitted and the boats made ready for work, boats are complete with road transport
bow and stern supports and lifting slings, paintwork "as is" NATO paintwork and
boats will need repainting, all spares are available off the self. |
|
Boats are fully road transportable and weigh 6.4 tons |
|
Price:
|
Euro E20,500
plus VAT if
applicable.
Prices are firm and not negotiable |
|
|
click on image to enlarge and print
|
|
Road
transportable Damen Minicat 1000, survey/dredger tender Folio
WB114/H On Charter |
|
|
Built:
|
By Damen shipyard Holland 1978 |
|
Class:
|
Workboat
code, category 3, RYA SCV2 |
|
Dimensions:
|
Length 10.6m
(34'10"), beam 3.6m (11'-8"), draught 1.1m (3'-6") |
|
Main engine:
|
Single screw
Daewoo 160hp marine diesel engine, driving through 3-1 reduction gearbox
(all new 2001) |
|
Generator:
|
Petter 2.5 KVA, 220V, 500W 24V-220V inverter |
|
Bollard pull:
|
about 1.6
tons |
|
Speed:
|
8 knots |
|
Fuel capacity:
|
0.85 tons |
|
Transport weight:
|
20 tons |
|
Twin push bows, removable guard rails, safety equipment for 6 persons.
Forward wheelhouse with bench shelving to mount survey equipment
|
|
Nav. Aids:
|
Radar, VHF,
compass |
|
Price:
|
Pounds
sterling £50,000, now reduced to £40,000 for quick sale, plus VAT if applicable.
Inspection/delivery West coast Scotland |
|
|
|
click on image to enlarge and print
|
|
Single
Screw steel workboat Folio
WB19/D SOLD |
|
|
Built:
|
By Damen shipyard Holland 1978 |
|
Type:
|
Pushycat 42 |
|
Class:
|
Irish
department of Marine passenger licence (similar to U.K. workboat code only
much more stringent |
|
Dimensions:
|
Length
12.65m, beam 3.53m, draught 1.25m |
|
Main engine:
|
Caterpillar
240hp |
|
Bollard pull:
|
2.6 tons |
|
Speed:
|
9 knots |
|
Fuel capacity:
|
2 tons |
|
Transport weight:
|
20 tons |
|
Equipment:
|
1 ton
hydraulic winch "A" frame and plough, built in surface demand dive spread.
Push bow and towing post |
|
Nav. Aids:
|
VHF radio,
radar, compass |
|
Price:
|
Pounds
sterling £45,000. inspection/delivery East coast Ireland |
| |
|
click on image to enlarge and print
|
|
Aluminium outboard Motor Workboat Folio
WB112/O
SOLD |
|
Built: |
By Malakoff Limited (Voe Boats) Shetland
Islands |
|
Construction: |
Welded Aluminium foam filled and
unsinkable, open boat with self draining deck |
|
Length: |
21ft (6.4om) |
|
Motor: |
Suitable for outboard motors up to 60HP,
no motor included |
|
Price: |
Pounds sterling £2200 firm plus VAT if
applicable. Inspection/delivery West Coast Scotland |
|
click on image to enlarge and print
|
|
Single Screw Steel Dutch Vlet Open
Workboat Folio WB107/C |
|
Built: |
By Damen shipyard
Holland, age unknown |
|
Dimensions: |
Length 21ft
(6.40m), beam 6'-6" (1.98m), draught 2ft (0.61m) |
|
Engine: |
Lister ST3 diesel
engine 27HP, driving through Lister hydraulic marine gearbox of 2-1
reduction |
|
Steering Gear: |
Wheel steering by
chain and cable |
|
Towing post: |
"H" type |
|
Price: |
Pounds sterling
£7,000 firm. Inspection/delivery Scotland |
|
Remarks: |
A very pretty Dutch
round bilge steel workboat with canoe stern, fully road transportable. |
Click on image to enlarge and print |
